SAS130 is a suspended metal ceiling system with lay-in modular tiles and exposed grid.
System Features (SAS Alugrid)
System Features (SAS Tee Grid)
Note: This includes the entire system and full associated components (suspension, tile, acoustic pad and fixings).
STANDARD MODULE SIZES (MM) WITH SQUARE EDGE
500 x 500
600 x 600
750 x 750
Bespoke tile sizes are available on request. Please contact our technical department for further information.
SAS ALUGRID-Q 15/08:
Module size (mm) Tile size (mm)
500 x 500 484 x 484
600 x 600 584 x 584
750 x 750 734 x 734
SAS ALUGRID-Q 15/16:
Module size (mm) Tile size (mm)
500 x 500 484 x 484
600 x 600 584 x 584
750 x 750 734 x 734
SAS ALUGRID-Q 15/19:
Module size (mm) Tile size (mm)
500 x 500 484 x 484
600 x 600 584 x 584
750 x 750 734 x 734
SAS ALUGRID-Q 25/16:
Module size (mm) Tile size (mm)
500 x 500 474 x 474
600 x 600 574 x 574
750 x 750 724 x 724
SAS ALUGRID-P 15/08:
Module size (mm) Tile size (mm)
500 x 500 484 x 484
600 x 600 584 x 584
750 x 750 734 x 734
SAS ALUGRID-P 15/16:
Module size (mm) Tile size (mm)
500 x 500 484 x 484
600 x 600 584 x 584
750 x 750 734 x 734
SAS ALUGRID-P CLEANSEAL:
Module size (mm) Tile size (mm)
500 x 500 484 x 484
600 x 600 584 x 584
750 x 750 734 x 734
SAS TEE GRID T15:
Module size (mm) Tile size (mm)
500 x 500 484 x 484
600 x 600 584 x 584
750 x 750 734 x 734
SAS TEE GRID T24:
Module size (mm) Tile size (mm)
500 x 500 484 x 484
600 x 600 584 x 584
750 x 750 734 x 734
SPECIAL & NON-STANDARD FINISHES
Available in full range of standard RAL colours
Anti-Microbial Coating
Other specialist powder coat finishes are available on request. For more information on non-standard finishes, please contact our technical services team.
Other acoustic treatments are available, depending on project requirement. Please contact our technical department for more information.
Tiles can be formed with apertures during manufacturing for integration with lighting and other services.
Alugrid-Q sections can be supplied with “bird’s mouth” mitres on one side only. These form a flush abutment to lighting and other services resting directly on the grid. These sections are suitable for ceilings where the services are of a larger modular size than the ceiling tiles.
A lightweight* system can support additional loads up to 3Kg. This is based on a point or uniformly distributed load over 0.36m2, positioned a minimum of 1000mm apart. This should be considered for lightweight installations only.
For loads greater than 3Kg, we would recommend using independent suspension.
If you have a concern over loads, please contact our technical team for advice.
Lightweight meaning base system only such as fleece or pad tile backing. Where a ceiling supports the load of services or for acoustically upgraded systems, Emac hanger centres should be installed at 1200mm centres. Hanger centres should always be considered when applying additional loads.
The continuous linear thread form allows the easy location and relocation of partition heads by means of an M6 bolt. The design of Alugrid-Q means this can happen repeatedly without causing damage. This same feature also allows for hanging signs and other lightweight features.