Void access can be achieved through demounting profiles.
SAS740 is currently available in 50 mm x 200 mm x 3000 mm profile sizes.
Luminaire unit sizes:
For sufficient quantity we will consider bespoke dimensions.
SAS740 is available in all standard SAS finishes. Bespoke finishes are available on request, including polished and anodised.
SAS740 lights add an integrated general illumination capability to an SAS740 installation. Lit sections can be mounted individually or in a continuous fashion, with control gear mounted in the top of the profile (not visible from below.) SAS740 lights are designed to deliver well balanced lit environments suitable for large spaces and central circulation areas.
The profile has space to allow up-lighting to be included with allowance for gaps at support brackets and driver locations.
The LED light source used in the SAS740 will still deliver over 90% of their peak light output after 60,000 hours of operation. Electronic control gear will operate for 100,000 hrs with a maximum 10% failure level.
Light modules can be accessed for maintenance from below by removing the diffuser, and easily demounted by releasing the retaining spring clips positioned in each corner.
Control gear may be replaced by unplugging the remote pack.
Emergency lighting is provided through 3-hour maintained emergency versions of the light module. All emergency lighting provision calculations should be approved by a suitably qualified person.
Emergency gear must be mounted within 1m of the luminaire separately on the support grid rather than within the profile.
Each individual unit is supplied with a DALI addressable and dimmable control gear. Modules with integrated emergency provision have an additional DALI addressable and reporting emergency converter.
Opal polycarbonate diffuser or glare control lens options available.
Please contact our technical team for all questions relating to access, bespoke features and service integration.