SAS Door Service
SAS International offers a range of stocked architectural specification grade standard doors and a bespoke door manufacturing service.
The range of door facings includes natural wood veneers, FSC / PEFC approved CPLs (Continuous Pressure Laminate), paint grade veneers and high pressure laminates.
An extensive stock of doors is held at our Apollo Park facility resulting in short lead times on finished goods.
Standard Door Service
Eight natural wood veneers, four CPL finishes and paint grade doors are stocked in various standard sizes. Doors can be customised from three days to meet project requirements, including:
• Door re-sizing
• Incorporation of standard vision panels to comply with Approved Document M
• Upgrades to FD30 or FD60 with fitted
intumescent strip, in combination with cold
smoke or acoustic seals
• Fitting automatic threshold seals
• Pre-mortising for locks and or hinges
• Full compliance with DDA regulations
Bespoke Manufacturing Process
SAS International also offers a comprehensive
bespoke service for door sizes up to 3000 x
Doors can be specified fully finished with a 3
coat UV stable clear lacquer, applied during
manufacture, which enhances the natural features of the veneer. Bespoke SAS doors can be supplied with a high grade finish.
The bespoke service enhances the standard
• Fully finished non-standard door sizes
• Bespoke vision panels and bead styles
• Range of speciality veneer species and cuts
• Range of veneers with inlays
• Range of laminate finishes
• Pre-primed or fully finished paint grade doors
Door cores from stock are available as 44mm
thick cellular core (non fire rated), 44mm thick
solid core (30 minutes fire rated) and 54mm thick solid core (60 minutes fire rated), all subject to individual installation conditions.
To achieve full fire performance doors must be
installed with all necessary intumescent materials and an approved self-closing device fitted.
Doorsets that demand higher levels of fire
resistance are available, please contact our
technical department for further information.
Acoustic attenuation can be achieved to meet
the requirements of Approved Document E of
the Building Regulations 2003. A sound reduction index of up to Rw 33dB can be achieved when doors are fitted with appropriate perimeter and threshold seals.
For further information please contact our
Our range of finished doors sizes available from
1981 x 762mm 1981 x 838mm
2040 x 726mm 2040 x 826mm
2040 x 926mm 2700 x 838mm
2700 x 926mm
The full range of sizes may not be available in all standard veneer finishes.
Bespoke doors can be manufactured to all sizes up to a maximum size of 3000mm high x 1200mm wide.
All doors supplied by SAS can be pre-morticed for locks and hinges. When used in conjunction with SAS door-frames, door leaves can be supplied unhanded to suit SAS standard hinges for ease of ordering. This minimises on-site finishing.
Hi-Load hinges, both fixed pin or lift off are
supplied with all SAS door frame sets. The
maintenance free hinges are tested to BS EN
1935, Class 11 and are guaranteed for 25 years.