Clip-in Ceiling Systems

A choice of two different clip-in tile systems, one downward demountable and the other with a hinge and slide access are available from SAS International.

Clip-in tiles have a concealed suspension grid using an Emac primary grid system and either a Spring Tee (System 120) or Omega Bar (System 150).

Clip-in systems should be considered for use in areas of security and cleanliness. They are generally double coated for commercial kitchens, laboratories or humid environments.

Retail environments benefit with suspension spans of up to 2000mm* which minimises installation time.

A plain tile used in a clip in system can create a tight butt joint, providing a washable ceiling plane which is ideal for areas where hygiene and cleanliness are essential. A range of square or rectangular tile modules with bevelled edges and vertical sides are available.

Luminaires can be integrated into the system, dependent on weight, or supported directly from the grid system.

System 150 tiles can be pivoted and slid within the suspension system to provide access to large areas of the ceiling void for maintenance, up to 1500mm wide along the length of the ceiling system. Tiles are retained within the suspension grid to avoid any potential damage caused by removing tiles from the grid system and temporary storage on the floor

*Lightweight installations only, see installation advice.