Door Integration

System 8000 offers specifiers a wide range of integrating door options to meet varying aesthetic and specification criteria.

A range of aluminium, steel and timber door frames is available including a reduced height aluminium door channel. For further details please refer to our technical manual or contact a member of our technical team.

A comprehensive range of framed and frameless single and double leaf doors is available to integrate with System 8000 including:

Framed Glass Doors

Available in a range of aluminium and natural wood door frames, manufactured in full height or with glass over panels. Single and double leaf door frames are available to suit Single Glazed, 58mm Double Glazed and 105mm Double Glazed installations and are available as:

• Hinged – supplied with patch hinges
• Pivoted – supplied with offset pivots

Performance glass doors, up to FD60/60 (60 minutes integrity and insulation), can be supplied either full height or with overpanels.

Drop door seals are available to enhance acoustic performance. The innovative new drop door seal on a glass partitioning door will significantly increase sound attenuation from 23dB to 32dB, resulting in a significant reduction of unwanted noise.

Frameless Glass Doors

System 8000 can also be specified with frameless glass doors, either single or double leaf doors are available to suit Single Glazed, 58mm Double Glazed and 105mm Double Glazed installations and can be supplied as:

• Hinged – supplied with patch hinges
• Pivoted – supplied with pivots

Sliding Glass Doors

A range of sliding glass doors is available and can be installed either supported on surface mounted ironmongery or by top track supported rollers. For double glazed installations, the sliding glass door frame enables the door to open within the glass cavity.

Flush Double Glazed Doors

Complementing the system, flush double glazed doors are manufactured by SAS International using a sandwich construction of 6mm glass either side of an aluminium frame, providing a finished overall thickness of 45mm.

Flush glazed doors are hung on offset pivots and floor springs, and can also be fitted with pull handles, locks and latches.

Wood Flush Doors

SAS International offers a range of architectural specification grade doors of up to 3000 x 1200mm and can be specified fully finished with a 3-coat UV stable clear lacquer, which is applied during manufacture. This enhances the natural features of the veneer.

SAS also offers a wide range of door facings, including FSC / PEFC approved natural wood veneers, CPLs (Continuous Pressure Laminate), paint grade veneers and high pressure laminates.

SAS wood flush doors with reduced head door frames can offer a further design aesthetic. Rebated wood flush doors are also available, which allow the door face to sit flush with the glass.

Door Specification

• Incorporation of standard vision panels to  comply with 
Approved Document M
• Fitting automatic threshold seals
• Pre-mortising for locks and hinges
• Full compliance with DDA regulations
• Range of speciality veneer species and cuts
• Range of veneers with inlays
• Range of laminate finishes, including Formica

Fire Resistance for Wood Flush Doors

Doors are available as non fire rated or 30 minutes fire rated.

Acoustic Performance for Wood Flush Doors

Acoustic attenuation can be achieved to meet the requirements of Approved Document E of the Building Regulations 2003. A sound reduction index of up to Rw 33dB can be achieved.

For further information, please request a copy of the SAS doors brochure or download it from www.sasint.co.uk/doors